#
        | README file for
        |
        | ELSA WINNER Windows 95 Driver Disk, ver 4.10.01.0001-0001
        |
        |       WINNER 1000/T2D
        |
        | Copyright (c) 1994-98 ELSA AG, Aachen (Germany)
        |
        | ELSA AG                    Internet   : http://www.elsa.de
        | Sonnenweg 11               LocalWeb   : +49-(0)241-938800
        | D-52070 Aachen             CompuServe : GO ELSA
        |
        | ELSA Inc.                  Internet   : http://www.elsa.com
        | 2231 Calle De Luna         CompuServe : GO ELSA
        | Santa Clara, CA 95054
        | USA
        |
        | ELSA Asia Inc.             Internet   : http://www.elsa.com
        | 7F-11, No. 188, Sec. 5     CompuServe : GO ELSA
        | Nanking East Road
        | Taipeo 105
        | Taiwan, R. O. C.
        |
        | 09/15/97, GBorgs


        Contents

        1. Overview
        2. Contents
        3. Installation
        4. History
        5. Release Notes
        6. Known Bugs and Operating Notes



------------------------------------------------------------------------

1.      Overview

        This disk contains the ELSA WINNER Display Driver for
        Microsoft Windows 95.

        The drivers support 256, 65536 and 16 Million colors in all
        resolutions available on used ELSA WINNER board.



------------------------------------------------------------------------

2.      Contents

        The directory contains the following files:

        README.TXT
        LIESMICH.TXT
	elsawt2d.inf
	elsawt2dd.drv
	elsawt2dv.vxd
	elsawt2dx.dll
      
------------------------------------------------------------------------

3.      Installation

        This section descibes the steps to install a ELSA WINNER
        Display Driver for Windows 95.


3.1     Installation of ELSA WINNER Display Drivers

        First install Windows 95 without special drivers for the ELSA
        WINNER graphics board. The installation procedure should
        install a Microsoft driver for boards based on S3 chips.

        The installation of the ELSA WINNER Display Driver starts from
        the Windows desktop.

        - Start the dialog "Properties for Display" by clicking right
          mouse button on the desktop or per Control Panel.
        - Select the Property Page "Settings"
        - Push the button "Change Display Type...". A dialog "Change
          Display Type" will pop up.
        - Push the button "Change..." inside the frame "Adapter Type".
          You will see the "Select Device" dialog.
        - In this dialog push the button "Have Disk..." and change to
          the WIN95 directory on the ELSAware CD for your WINNER board.
        - Select in the "Manufacturer" list ELSA WINNER Display Driver
          and in the list "Models" your WINNER board.
        - If you use an ELSA monitor, make the same procedure for
          "Monitor Type" in the "Change Display Type" dialog.
        - Close the dialog "Change Display Type". At this time the
          screen flickers a moment. This is not a bug! Windows tries to
          find out, which graphics modes are available with this
          driver.
        - Now you can select resolution and color depth in the main
          dialog "Properties for Display". For the first installation
          you should select 1024x768 and 256 colors. This configuration
          is available for all memory configurations on all ELSA
          Boards.
        - Close "Properties for Display" by "OK" or "Apply
          now".

        Normally you need to boot your system. Push the button "Restart
        now".

        In all following Windows sessions you can change the resolution
        without rebooting your system.


------------------------------------------------------------------------

4.      Revision History

4.1	certified WHQL driver


------------------------------------------------------------------------

5.      Release notes

5.1	No support of the ELSA Windows tools !